Model HP Packer
Model
HP packer is designed for zonal isolation in extreme high pressure, high temperature
environments with maximum ratings of 10,000psi at 350oF (no axial
loads). The packer is hydraulic-set and could be retrieved by retrieving tools.
Two
sets of wedge shaped slips were installed above and below the elements, the featured
slips enable a more balanced gripping force distribution with less risks of
causing casing distortion. The element consists of 3 pieces of high temperature
elastomers, brass retainers are installed at both ends to ensure full expansion
of elastomers under high temperatures.
The
HP packer could be used for fracturing/acidizing, production or other zonal
isolation purposes where extra pressure bearing is required, and higher
temperature is present.